DSM Stanyl? TE350 Nylon 46 (European and Asian Grade) (Cond)
Subcategory: Nylon; Nylon 46; Polymer; Thermoplastic
Material Notes:
Stanyl is a high performance polyamide providing unmatched performance and value across an amazingly broad range of automotive and electronic applications. Stanyl offers:
- Highest mechanical properties at high temperatures
- Excellent resistance to wear and low friction
- Outstanding flow for easy processing and exceptional design freedom
- Stanyl High Flowgrades that match the best flowing LCPs while maintaining a high level of mechanical properties
Key Applications:
Information provided by DSM.
No vendors are listed for this material. Please click here if you are a supplier and would like information on how to add your listing to this material.
| Physical Properties | Metric | English | Comments | |
|
||||
| Density | 1.38 g/cc | 0.0499 lb/in? | (DAM); ISO 1183 | |
| Water Absorption | 9.5 % | 9.5 % | DAM; Sim. to ISO 62 | |
| Moisture Absorption at Equilibrium | 2.6 % | 2.6 % | Humidity Absorption (DAM); Sim. to ISO 62 | |
| Linear Mold Shrinkage | 0.02 cm/cm | 0.02 in/in | Parallel (DAM); ISO 294-4 | |
| Linear Mold Shrinkage, Transverse | 0.02 cm/cm | 0.02 in/in | Parallel (DAM); ISO 294-4 | |
Mechanical Properties |
||||
|
||||
| Tensile Strength, Yield | 50 MPa | 7250 psi | ISO 527-1/-2 | |
| Elongation at Break | Min 50 % | Min 50 % | ISO 527-1/-2 | |
| Elongation at Yield | 20 % | 20 % | ISO 527-1/-2 | |
| Tensile Modulus | 1.4 GPa | 203 ksi | ISO 527-1/-2 | |
| Charpy Impact Unnotched | NB | NB | 23?C; ISO 179/1eU | |
| Charpy Impact, Notched, Low Temp | 0.4 J/cm? | 1.9 ft-lb/in? | -30?C; ISO 179/1eA | |
| Charpy Impact, Unnotched Low Temp | 12.5 J/cm? | 59.5 ft-lb/in? | -30?C; ISO 179/1eU | |
| Charpy Impact, Notched | 1.4 J/cm? | 6.66 ft-lb/in? | 23?C; ISO 179/1eA | |
| Tensile Creep Modulus, 1000 hours | 850 MPa | 123000 psi | ISO 899-1 | |
Electrical Properties |
||||
|
||||
| Volume Resistivity | 1e+009 ohm-cm | 1e+009 ohm-cm | IEC 60093 | |
| Surface Resistance | 1e+014 ohm | 1e+014 ohm | IEC 60093 | |
| Dielectric Constant | 4.1 | 4.1 | 1 MHz; IEC 60250 | |
| Dielectric Constant, Low Frequency | 10 | 10 | 100Hz; IEC 60250 | |
| Dielectric Strength | 25 kV/mm | 635 kV/in | IEC 60243-1 | |
| Dissipation Factor | 0.008 | 0.008 | 1 MHz; IEC 60250 | |
| Dissipation Factor, Low Frequency | 0.028 | 0.028 | 100 Hz; IEC 60250 | |
| Comparative Tracking Index | 325 V | 325 V | IEC 60112 | |
Thermal Properties |
||||
|
||||
| Melting Point | 295 ?C | 563 ?F | 10?C/min (DAM); ISO 11357-1/-3 | |
Descriptive Properties |
||||
|
||||
| Flame Retardant | Yes | |||
| Flame Retarding Agent | Yes | |||
| Heat Stabilized or Stable to Heat | Yes | |||
| Injection Molding | Yes | |||
| Lubricants | Yes | |||
| Platable | Yes | |||
| Release Agent | Yes | |||
| Without Fillers | Yes | |||
|
||||
 Printer friendly version |
||||
Some of the values displayed above may have been converted from their original units and/or rounded in order to display the information in a consistant format. Users requiring more precise data for scientific or engineering calculations can click on the property value to see the original value as well as raw conversions to equivalent units. We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding error. We also ask that you refer to MatWeb's disclaimer and terms of use regarding this information. Click here to view all the property values for this datasheet as they were originally entered into MatWeb.
