DSM Stanyl? TW200F8 Nylon 46-40% Glass Reinforced (European Grade) (Cond)
Subcategory: Filled/Reinforced Thermoplastic; Nylon; Nylon 46; Polymer; Thermoplastic
Material Notes:
Stanyl is a high performance polyamide providing unmatched performance and value across an amazingly broad range of automotive and electronic applications. Stanyl offers:
- Highest mechanical properties at high temperatures
- Excellent resistance to wear and low friction
- Outstanding flow for easy processing and exceptional design freedom
- Stanyl High Flowgrades that match the best flowing LCPs while maintaining a high level of mechanical properties
Key Applications:
Information provided by DSM.
No vendors are listed for this material. Please click here if you are a supplier and would like information on how to add your listing to this material.
| Physical Properties | Metric | English | Comments | |
|
||||
| Density | 1.51 g/cc | 0.0546 lb/in? | (DAM); ISO 1183 | |
| Water Absorption | 8 % | 8 % | DAM; Sim. to ISO 62 | |
| Moisture Absorption at Equilibrium | 2.2 % | 2.2 % | Humidity Absorption (DAM); Sim. to ISO 62 | |
| Linear Mold Shrinkage | 0.005 cm/cm | 0.005 in/in | Parallel (DAM); ISO 294-4 | |
| Linear Mold Shrinkage, Transverse | 0.011 cm/cm | 0.011 in/in | Parallel (DAM); ISO 294-4 | |
Mechanical Properties |
||||
|
||||
| Tensile Strength at Break | 140 MPa | 20300 psi | ISO 527-1/-2 | |
| Elongation at Break | 6 % | 6 % | ISO 527-1/-2 | |
| Tensile Modulus | 8 GPa | 1160 ksi | ISO 527-1/-2 | |
| Charpy Impact Unnotched | 9.5 J/cm? | 45.2 ft-lb/in? | 23?C; ISO 179/1eU | |
| Charpy Impact, Notched, Low Temp | 1.2 J/cm? | 5.71 ft-lb/in? | -30?C; ISO 179/1eA | |
| Charpy Impact, Unnotched Low Temp | 7.5 J/cm? | 35.7 ft-lb/in? | -30?C; ISO 179/1eU | |
| Charpy Impact, Notched | 2.2 J/cm? | 10.5 ft-lb/in? | 23?C; ISO 179/1eA | |
| Tensile Creep Modulus, 1000 hours | 5500 MPa | 798000 psi | ISO 899-1 | |
Electrical Properties |
||||
|
||||
| Volume Resistivity | 1e+010 ohm-cm | 1e+010 ohm-cm | IEC 60093 | |
| Surface Resistance | 1e+013 ohm | 1e+013 ohm | IEC 60093 | |
| Dielectric Constant | 4.7 | 4.7 | 1 MHz; IEC 60250 | |
| Dielectric Constant, Low Frequency | 16 | 16 | 100Hz; IEC 60250 | |
| Dielectric Strength | 20 kV/mm | 508 kV/in | IEC 60243-1 | |
| Dissipation Factor | 0.01 | 0.01 | 1 MHz; IEC 60250 | |
| Dissipation Factor, Low Frequency | 0.06 | 0.06 | 100 Hz; IEC 60250 | |
| Comparative Tracking Index | 300 V | 300 V | IEC 60112 | |
Thermal Properties |
||||
|
||||
| Melting Point | 295 ?C | 563 ?F | 10?C/min (DAM); ISO 11357-1/-3 | |
Descriptive Properties |
||||
|
||||
| Heat Stabilized or Stable to Heat | Yes | |||
| Injection Molding | Yes | |||
| Platable | Yes | |||
| With Fillers | Yes | |||
|
||||
 Printer friendly version |
||||
Some of the values displayed above may have been converted from their original units and/or rounded in order to display the information in a consistant format. Users requiring more precise data for scientific or engineering calculations can click on the property value to see the original value as well as raw conversions to equivalent units. We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding error. We also ask that you refer to MatWeb's disclaimer and terms of use regarding this information. Click here to view all the property values for this datasheet as they were originally entered into MatWeb.
