DuPont Zytel? 7304 NC010 Nylon 6
Subcategory: Nylon; Nylon 6; Polymer; Thermoplastic
Material Notes:
Zytel? 7304 NC010 is a medium viscosity, unlubricated polyamide 6 resin for extrusion applications.
No vendors are listed for this material. Please click here if you are a supplier and would like information on how to add your listing to this material.
| Physical Properties | Metric | English | Comments | |
|
||||
| Specific Gravity | 1.13 g/cc | 0.0408 lb/in? | DAM; ASTM D 792 | |
| Moisture Absorption at Equilibrium | 3 % | 3 % | 50%RH; 23?C; DAM; ASTM D 570 | |
| Linear Mold Shrinkage | 0.012 cm/cm | 0.012 in/in | Flow 3.2mm (0.125in) | |
Mechanical Properties |
||||
|
||||
| Tensile Strength, Yield | 50 MPa | 7250 psi | 50%RH; ASTM D 638 | |
| Tensile Strength, Yield | 80 MPa | 11600 psi | DAM; ASTM D 638 | |
| Tensile Modulus | 1.5 GPa | 218 ksi | 50%RH; ASTM D 638 | |
| Tensile Modulus | 3 GPa | 435 ksi | DAM; ASTM D 638 | |
| Izod Impact, Notched | 1.33 J/cm | 2.49 ft-lb/in | DAM; ASTM D 256 | |
| Izod Impact, Notched | 0.48 J/cm | 0.899 ft-lb/in | -40?C; DAM; ASTM D 256 | |
| Izod Impact, Notched | 6.4 J/cm | 12 ft-lb/in | 50%RH; ASTM D 256 | |
Thermal Properties |
||||
|
||||
| Melting Point | 220 ?C | 428 ?F | DAM; ASTM D 3418 | |
| Deflection Temperature at 0.46 MPa (66 psi) | 160 ?C | 320 ?F | DAM; ASTM D 648 | |
| Deflection Temperature at 1.8 MPa (264 psi) | 65 ?C | 149 ?F | DAM; ASTM D 648 | |
Processing Properties |
||||
|
||||
| Melt Temperature | 230 - 240 ?C | 446 - 464 ?F | Extrusion | |
| Melt Temperature | 260 - 280 ?C | 500 - 536 ?F | Injection Molding | |
| Melt Temperature | 230 ?C | 446 ?F | Optimum; Extrusion | |
| Melt Temperature | 270 ?C | 518 ?F | Optimum; Injection Molding | |
| Mold Temperature | 50 - 90 ?C | 122 - 194 ?F | Injection Molding | |
| Mold Temperature | 70 ?C | 158 ?F | Optimum; Injection Molding | |
| Drying Temperature | 80 ?C | 176 ?F | Extrusion | |
| Drying Temperature | 80 ?C | 176 ?F | Injection Molding | |
| Dry Time | 4 - 6 hour | 4 - 6 hour | Extrusion; Dehumidified Dryer | |
| Dry Time | 2 - 4 hour | 2 - 4 hour | Injection Molding; Dehumidified Dryer | |
| Moisture Content | Max 0.04 % | Max 0.04 % | Extrusion | |
| Moisture Content | Max 0.05 % | Max 0.05 % | Injection Molding | |
Descriptive Properties |
||||
|
||||
| Appearance | Natural Color | |||
| Drying | Recommended | If moisture content of resin exceeds recommended level | ||
| DuPont Product Category | Unreinforced Resins | |||
| DuPont Product Category | Extrusion Resins | |||
| Features | Fuel Resistant | |||
| Features | Oil Resistant | |||
| Features | Grease Resistant | |||
| Features | Chemical Resistance, Good | |||
| Form | Pellets | |||
| Part Marking Code | >PA6< | ISO 11469 | ||
| Processing Method | Injection Molding | |||
| Region | Americas | |||
| Resin Identification | PA6 | ISO 1043 | ||
| Uses | Appliance Components | |||
| Uses | Industrial Applications | |||
| Uses | Automotive Applications | |||
| Uses | Electrical/Electronic Applications | |||
|
||||
 Printer friendly version |
||||
Some of the values displayed above may have been converted from their original units and/or rounded in order to display the information in a consistant format. Users requiring more precise data for scientific or engineering calculations can click on the property value to see the original value as well as raw conversions to equivalent units. We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding error. We also ask that you refer to MatWeb's disclaimer and terms of use regarding this information. Click here to view all the property values for this datasheet as they were originally entered into MatWeb.
