DuPont Zytel? 70G30L NC010 Nylon 66
Subcategory: Nylon; Nylon 66; Polymer; Thermoplastic
Material Notes:
Zytel? 70G30L NC010 is a 30% glass fiber reinforced polyamide 66 resin for injection molding.
No vendors are listed for this material. Please click here if you are a supplier and would like information on how to add your listing to this material.
| Physical Properties | Metric | English | Comments | |
|
||||
| Density | 1.37 g/cc | 0.0495 lb/in? | DAM; ISO 1183 | |
| Filler Content | 30 % | 30 % | Glass fiber reinforcement | |
| Linear Mold Shrinkage | 0.003 cm/cm | 0.003 in/in | Parallel 2.0mm; ISO 294-4 | |
Mechanical Properties |
||||
|
||||
| Tensile Strength at Break | 130 MPa | 18900 psi | 50%RH; ISO 527 | |
| Tensile Strength at Break | 195 MPa | 28300 psi | DAM; ISO 527 | |
| Elongation at Break | 3.5 % | 3.5 % | ISO 527 | |
| Elongation at Break | 5 % | 5 % | ISO 527 | |
| Tensile Modulus | 7.2 GPa | 1040 ksi | 50%RH; ISO 527 | |
| Tensile Modulus | 9.8 GPa | 1420 ksi | DAM; ISO 527 | |
| Izod Impact, Notched (ISO) | 12 kJ/m? | 5.71 ft-lb/in? | DAM; ISO 180/1A | |
| Izod Impact, Notched (ISO) | 14 kJ/m? | 6.66 ft-lb/in? | 50%RH; ISO 180/1A | |
| Charpy Impact Unnotched | 8 J/cm? | 38.1 ft-lb/in? | DAM; ISO 179/1eU | |
| Charpy Impact Unnotched | 9.3 J/cm? | 44.3 ft-lb/in? | 50%RH; ISO 179/1eU | |
| Charpy Impact, Notched | 1.3 J/cm? | 6.19 ft-lb/in? | DAM; ISO 179/1eA | |
| Charpy Impact, Notched | 1.5 J/cm? | 7.14 ft-lb/in? | 50%RH; ISO 179/1eA | |
Electrical Properties |
||||
|
||||
| Comparative Tracking Index | 600 V | 600 V | DAM; UL 746A | |
Thermal Properties |
||||
|
||||
| Melting Point | 262 ?C | 504 ?F | 10?C/min; DAM; ISO 11357-1/-3 | |
| Deflection Temperature at 1.8 MPa (264 psi) | 253 ?C | 487 ?F | DAM; ISO 75-1/-2 | |
| UL RTI, Electrical | 130 ?C | 266 ?F | 3.0mm; DAM; UL 746B | |
| UL RTI, Electrical | 130 ?C | 266 ?F | 1.5mm; DAM; UL 746B | |
| UL RTI, Electrical | 130 ?C | 266 ?F | 0.71mm; DAM; UL 746B | |
| UL RTI, Mechanical with Impact | 120 ?C | 248 ?F | 0.71mm; DAM; UL 746B | |
| UL RTI, Mechanical with Impact | 120 ?C | 248 ?F | 1.5mm; DAM; UL 746B | |
| UL RTI, Mechanical with Impact | 120 ?C | 248 ?F | 3.0mm; DAM; UL 746B | |
| UL RTI, Mechanical without Impact | 130 ?C | 266 ?F | 3.0mm; DAM; UL 746B | |
| UL RTI, Mechanical without Impact | 130 ?C | 266 ?F | 1.5mm; DAM; UL 746B | |
| UL RTI, Mechanical without Impact | 130 ?C | 266 ?F | 0.71mm; DAM; UL 746B | |
| Flammability, UL94 | HB | HB | 0.71mm; DAM; UL94 | |
| Flammability, UL94 | HB | HB | 3.0mm; DAM; IEC 60695-11-10 | |
| Flammability, UL94 | HB | HB | 3.0mm; DAM; UL94 | |
| Flammability, UL94 | HB | HB | 1.5mm; DAM; IEC 60695-11-10 | |
| Flammability, UL94 | HB | HB | 1.5mm; DAM; UL94 | |
| Flammability, UL94 | HB | HB | 0.71mm; DAM; IEC 60695-11-10 | |
Processing Properties |
||||
|
||||
| Melt Temperature | 285 - 305 ?C | 545 - 581 ?F | ||
| Melt Temperature | 295 ?C | 563 ?F | Optimum | |
| Mold Temperature | 70 - 120 ?C | 158 - 248 ?F | ||
| Mold Temperature | 100 ?C | 212 ?F | Optimum | |
| Drying Temperature | 80 ?C | 176 ?F | ||
| Dry Time | 2 - 4 hour | 2 - 4 hour | Dehumidified Dryer | |
| Moisture Content | Max 0.2 % | Max 0.2 % | ||
Descriptive Properties |
||||
|
||||
| Appearance | Natural Color | |||
| Drying | Recommended | If moisture content of resin exceeds recommended level | ||
| DuPont Product Category | Glass Reinforced Resins | |||
| DuPont Product Category | Glass Reinforced Resins | |||
| Features | Fatigue Resistant | |||
| Features | Chemical Resistance, Good | |||
| Features | Creep Resistance, Good | |||
| Features | General Purpose | |||
| Features | Oil Resistant | |||
| Features | Stiffness, High | |||
| Features | Strength, High | |||
| Features | Fuel Resistant | |||
| Features | Grease Resistant | |||
| Form | Pellets | |||
| Part Marking Code | >PA66-GF30< | ISO 11469 | ||
| Processing Method | Injection Molding | |||
| Region | Americas | |||
| Region | Asia/Pacific | |||
| Region | Europe | |||
| Resin Identification | PA66-GF30 | ISO 1043 | ||
| Uses | Electrical/Electronic Applications | |||
| Uses | Appliance Components | |||
| Uses | Automotive Applications | |||
| Uses | Industrial Applications | |||
|
||||
 Printer friendly version |
||||
Some of the values displayed above may have been converted from their original units and/or rounded in order to display the information in a consistant format. Users requiring more precise data for scientific or engineering calculations can click on the property value to see the original value as well as raw conversions to equivalent units. We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding error. We also ask that you refer to MatWeb's disclaimer and terms of use regarding this information. Click here to view all the property values for this datasheet as they were originally entered into MatWeb.
