DuPont Zytel? 70G43HSLA BK099 Nylon 66
Subcategory: Nylon; Nylon 66; Polymer; Thermoplastic
Material Notes:
Zytel? 70G43HSLA BK099 is a 43% glass fiber reinforced, heat stabilized, black polyamide 66 resin for injection molding.
No vendors are listed for this material. Please click here if you are a supplier and would like information on how to add your listing to this material.
| Physical Properties | Metric | English | Comments | |
|
||||
| Density | 1.49 g/cc | 0.0538 lb/in? | DAM; ISO 1183 | |
| Filler Content | 43 % | 43 % | Glass fiber reinforcement | |
Mechanical Properties |
||||
|
||||
| Tensile Strength at Break | 160 MPa | 23200 psi | 50%RH; ISO 527 | |
| Tensile Strength at Break | 225 MPa | 32600 psi | DAM; ISO 527 | |
| Elongation at Break | 2.5 % | 2.5 % | ISO 527 | |
| Elongation at Break | 3.5 % | 3.5 % | ISO 527 | |
| Tensile Modulus | 11 GPa | 1600 ksi | 50%RH; ISO 527 | |
| Tensile Modulus | 14 GPa | 2030 ksi | DAM; ISO 527 | |
| Izod Impact, Notched (ISO) | 14 kJ/m? | 6.66 ft-lb/in? | DAM; ISO 180/1A | |
| Izod Impact, Notched (ISO) | 16 kJ/m? | 7.61 ft-lb/in? | 50%RH; ISO 180/1A | |
| Charpy Impact Unnotched | 9 J/cm? | 42.8 ft-lb/in? | DAM; ISO 179/1eU | |
| Charpy Impact Unnotched | 9.5 J/cm? | 45.2 ft-lb/in? | 50%RH; ISO 179/1eU | |
| Charpy Impact, Notched | 1.6 J/cm? | 7.61 ft-lb/in? | DAM; ISO 179/1eA | |
| Charpy Impact, Notched | 1.8 J/cm? | 8.57 ft-lb/in? | 50%RH; ISO 179/1eA | |
Thermal Properties |
||||
|
||||
| Melting Point | 262 ?C | 504 ?F | 10?C/min; DAM; ISO 11357-1/-3 | |
| Deflection Temperature at 1.8 MPa (264 psi) | 255 ?C | 491 ?F | DAM; ISO 75-1/-2 | |
Processing Properties |
||||
|
||||
| Melt Temperature | 285 - 305 ?C | 545 - 581 ?F | ||
| Melt Temperature | 295 ?C | 563 ?F | Optimum | |
| Mold Temperature | 70 - 120 ?C | 158 - 248 ?F | ||
| Mold Temperature | 100 ?C | 212 ?F | Optimum | |
| Drying Temperature | 80 ?C | 176 ?F | ||
| Dry Time | 2 - 4 hour | 2 - 4 hour | Dehumidified Dryer | |
| Moisture Content | Max 0.2 % | Max 0.2 % | ||
Descriptive Properties |
||||
|
||||
| Additive | Heat Stabilizer | |||
| Appearance | Black | |||
| Drying | Recommended | If moisture content of resin exceeds recommended level | ||
| DuPont Product Category | Glass Reinforced Resins | |||
| Features | Thermal Aging Resistance, Good | |||
| Features | Heat Aging Resistance, Good | |||
| Features | Oil Resistant | |||
| Features | Strength, High | |||
| Features | Grease Resistant | |||
| Features | Fuel Resistant | |||
| Features | Stiffness, High | |||
| Features | Creep Resistance, Good | |||
| Features | Chemical Resistance, Good | |||
| Features | Fatigue Resistant | |||
| Form | Pellets | |||
| Part Marking Code | >PA66-GF43< | ISO 11469 | ||
| Processing Method | Injection Molding | |||
| Region | Americas | |||
| Region | Asia/Pacific | |||
| Region | Europe | |||
| Resin Identification | PA66-GF43 | ISO 1043 | ||
| Uses | Appliance Components | |||
| Uses | Industrial Applications | |||
| Uses | Automotive Applications | |||
| Uses | Electrical/Electronic Applications | |||
|
||||
 Printer friendly version |
||||
Some of the values displayed above may have been converted from their original units and/or rounded in order to display the information in a consistant format. Users requiring more precise data for scientific or engineering calculations can click on the property value to see the original value as well as raw conversions to equivalent units. We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding error. We also ask that you refer to MatWeb's disclaimer and terms of use regarding this information. Click here to view all the property values for this datasheet as they were originally entered into MatWeb.
