Mitsui Arlen? PA6T C215 15% Glass Fiber-Reinforced Modified Nylon 6T (DAM)

Return to last search
Printer friendly version	Add to Folder:
Download to Excel (requires Excel and Windows)
Export data to your CAD/FEA program

Subcategory: Filled/Reinforced Thermoplastic; Nylon; Polymer; Thermoplastic

Material Notes:
ARLEN? is a heat resistant, modified polyamide 6T developed by Mitsui Chemicals, Inc. With a high melting point (320?C) and a rigidity level comparable to super engineering plastics, it possesses strong dimensional stability and chemical resistance. In addition, the effect of water absorption, which is a traditional weakness of polyamides, has been reduced to a minimum.

No vendors are listed for this material. Please click here if you are a supplier and would like information on how to add your listing to this material.

Physical Properties	Metric	English	Comments
Density	1.3 g/cc	0.047 lb/in?	ASTM D792
Filler Content	15 %	15 %
Water Absorption	0.4 %	0.4 %	24 hours in 23?C water, 2mmt; ASTM D570
Water Absorption	3.8 %	3.8 %	24 hours in 100?C water, 2mmt; ASTM D570
Linear Mold Shrinkage	0.006 cm/cm	0.006 in/in	2mmt, Flow Direction; ASTM D955
Linear Mold Shrinkage, Transverse	0.009 cm/cm	0.009 in/in	2mmt, Vertical Direction; ASTM D955
Mechanical Properties
Hardness, Rockwell M	105	105	ASTM D785
Tensile Strength at Break	110 MPa	16000 psi	ASTM D638
Elongation at Break	3 %	3 %	Measured between the chucks; ASTM D638
Flexural Modulus	6 GPa	870 ksi	ASTM D790
Flexural Strength	180 MPa	26100 psi	ASTM D790
Izod Impact, Notched	0.5 J/cm	0.937 ft-lb/in	ASTM D256
Electrical Properties
Volume Resistivity	1e+016 ohm-cm	1e+016 ohm-cm	ASTM D257
Dielectric Constant	4.2	4.2	At 1 MHz; ASTM D150
Dielectric Strength	25 kV/mm	635 kV/in	ASTM D149
Dissipation Factor	0.02	0.02	At 1 MHz; ASTM D150
Thermal Properties
CTE, linear 20?C	34 ?m/m-?C	18.9 ?in/in-?F	Flow Direction; ASTM D696
CTE, linear 20?C Transverse to Flow	55 ?m/m-?C	30.6 ?in/in-?F	Vertical Direction; ASTM D696
Melting Point	310 ?C	590 ?F
Deflection Temperature at 1.8 MPa (264 psi)	295 ?C	563 ?F	ASTM D648
Glass Temperature	85 ?C	185 ?F
Flammability, UL94	HB	HB
Processing Properties
Feed Temperature	50 - 90 ?C	122 - 194 ?F	Hopper Bottom Temp for Mechanical and Structural Standard Molding
Feed Temperature	50 - 90 ?C	122 - 194 ?F	Hopper Bottom for Electronic and Electric Standard Molding
Nozzle Temperature	315 - 335 ?C	599 - 635 ?F	NH Cylinder Temp for Electronic and Electric Standard Molding
Nozzle Temperature	325 - 340 ?C	617 - 644 ?F	NH Cylinder Temp for Mechanical and Structural Standard Molding
Zone 1	315 - 330 ?C	599 - 626 ?F	C1 Cylinder Temp for Mechanical and Structural Standard Molding
Zone 1	300 - 325 ?C	572 - 617 ?F	C1 Cylinder Temp for Electronic and Electric Standard Molding
Zone 2	320 - 335 ?C	608 - 635 ?F	C2 Cylinder Temp for Mechanical and Structural Standard Molding
Zone 2	315 - 335 ?C	599 - 635 ?F	C2 Cylinder Temp for Electronic and Electric Standard Molding
Zone 3	320 - 335 ?C	608 - 635 ?F	C3 Cylinder Temp for Electronic and Electric Standard Molding
Zone 3	325 - 340 ?C	617 - 644 ?F	C3 Cylinder Temp for Mechanical and Structural Standard Molding
Mold Temperature	90 - 140 ?C	194 - 284 ?F	for Mechanical and Structural Standard Molding
Mold Temperature	90 - 140 ?C	194 - 284 ?F	for Electronic and Electric Standard Molding
Screw Speed	150 rpm	150 rpm	for Electronic and Electric Standard Molding
Screw Speed	150 rpm	150 rpm	for Mechanical and Structural Standard Molding
Descriptive Properties
Injection Pressure	Medium	Electronic and Electric Standard Molding
Injection Pressure	Medium	Mechanical and Structural Standard Molding
Injection Speed	Medium	Electronic and Electric Standard Molding
Injection Speed	Medium	Mechanical and Structural Standard Molding
Printer friendly version

Applications:

• Connectors
• Jacks
• Switches
• Power supply terminals
• Various cases

Information provided by Mitsui.