Bayer MaterialScience Bayblend? FR 2010 Polycarbonate + ABS Blend
Subcategory: ABS Polymer; Polycarbonate; Polymer; Thermoplastic
Material Notes:
Key Features:
- Flame retarding agent
- Unfilled
- Flame retardant
Suitable processing methods:
- Injection molding
Information provided by Bayer Polymers.
No vendors are listed for this material. Please click here if you are a supplier and would like information on how to add your listing to this material.
| Physical Properties | Metric | English | Comments | |
|
||||
| Density | 1.04 g/cc | 0.0376 lb/in? | Melt | |
| Density | 1.18 g/cc | 0.0426 lb/in? | ||
| Water Absorption | 0.5 % | 0.5 % | ||
| Moisture Absorption at Equilibrium | 0.2 % | 0.2 % | 23?C/50% R.H. | |
| Melt Flow | 24 g/10 min | 24 g/10 min | 240?C/5 kg | |
Mechanical Properties |
||||
|
||||
| Tensile Strength, Yield | 60 MPa | 8700 psi | ||
| Elongation at Break | Min 50 % | Min 50 % | Nominal Strain at Break | |
| Elongation at Yield | 4 % | 4 % | ||
| Tensile Modulus | 2.7 GPa | 392 ksi | ||
Electrical Properties |
||||
|
||||
| Dielectric Constant | 3.1 | 3.1 | 1 MHz | |
| Dielectric Constant | 3.2 | 3.2 | 100 Hz | |
| Dielectric Strength | 30 kV/mm | 762 kV/in | ||
| Dissipation Factor | 0.004 | 0.004 | 100 Hz | |
| Dissipation Factor | 0.007 | 0.007 | 1 MHz | |
| Comparative Tracking Index | 350 V | 350 V | ||
Thermal Properties |
||||
|
||||
| CTE, linear 20?C | 76 ?m/m-?C | 42.2 ?in/in-?F | Parallel | |
| CTE, linear 20?C Transverse to Flow | 80 ?m/m-?C | 44.4 ?in/in-?F | ||
| Specific Heat Capacity | 1.63 J/g-?C | 0.39 BTU/lb-?F | Melt | |
| Thermal Conductivity | 0.165 W/m-K | 1.15 BTU-in/hr-ft?-?F | Melt | |
| Deflection Temperature at 0.46 MPa (66 psi) | 100 ?C | 212 ?F | ||
| Deflection Temperature at 1.8 MPa (264 psi) | 90 ?C | 194 ?F | ||
| Vicat Softening Point | 108 ?C | 226 ?F | 50?C/h 50N | |
| Flammability, UL94 | V-0 | V-0 | 1.5 mm UL Recognized | |
| Flammability, UL94 | 7 | 7 | 3 mm UL Recognized | |
Processing Properties |
||||
|
||||
| Melt Temperature | 240 ?C | 464 ?F | Injection Molding | |
| Mold Temperature | 80 ?C | 176 ?F | Injection Molding | |
| Ejection Temperature | 110 ?C | 230 ?F | ||
| Injection Velocity | 240 mm/sec | 9.45 in/sec | ||
Descriptive Properties |
||||
|
||||
| Effective thermal diffusivity | 0.972E-7 m?/s | Melt | ||
|
||||
 Printer friendly version |
||||
Some of the values displayed above may have been converted from their original units and/or rounded in order to display the information in a consistant format. Users requiring more precise data for scientific or engineering calculations can click on the property value to see the original value as well as raw conversions to equivalent units. We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding error. We also ask that you refer to MatWeb's disclaimer and terms of use regarding this information. Click here to view all the property values for this datasheet as they were originally entered into MatWeb.
