DuPont Rynite? PET 408 NC010 PET

Return to last search
Printer friendly version	Add to Folder:
Download to Excel (requires Excel and Windows)
Export data to your CAD/FEA program

Subcategory: Polyester, TP; Polyethylene Terephthalate (PET); Polymer; Thermoplastic

Material Notes:
Rynite? 408 NC010 is a 30% glass reinforced modified polyethylene terephthalate with improved impact resistance. Excellent balance of strength, stiffness, toughness, and temperature resistance.

No vendors are listed for this material. Please click here if you are a supplier and would like information on how to add your listing to this material.

Physical Properties	Metric	English	Comments
Density	1.49 g/cc	0.0538 lb/in?	ISO 1183
Specific Gravity	1.51 g/cc	0.0546 lb/in?	ASTM D 792
Filler Content	30 %	30 %	Glass fiber reinforcement
Water Absorption	0.06 %	0.06 %	50%RH,23?C,24h; 23?C; ASTM D 570
Linear Mold Shrinkage	0.002 cm/cm	0.002 in/in	Flow 3.2mm (0.125in)
Linear Mold Shrinkage	0.0021 cm/cm	0.0021 in/in	Flow 1.6mm (0.062in)
Linear Mold Shrinkage	0.0025 cm/cm	0.0025 in/in	Parallel 2.0mm; ISO 294-4
Linear Mold Shrinkage	0.0035 cm/cm	0.0035 in/in	Parallel Annealed; ISO 294-4
Linear Mold Shrinkage, Transverse	0.0063 cm/cm	0.0063 in/in	1.6mm (0.062in)
Linear Mold Shrinkage, Transverse	0.0075 cm/cm	0.0075 in/in	3.2mm (0.125in)
Linear Mold Shrinkage, Transverse	0.0085 cm/cm	0.0085 in/in	2.0mm; ISO 294-4
Linear Mold Shrinkage, Transverse	0.0105 cm/cm	0.0105 in/in	Annealed; ISO 294-4
Mechanical Properties
Hardness, Rockwell M	70	70	ASTM D 785
Hardness, Rockwell M	70	70	ISO 2039/2
Hardness, Rockwell R	115	115	ASTM D 785
Hardness, Rockwell R	115	115	ISO 2039/2
Tensile Strength at Break	125 MPa	18100 psi	ISO 527
Tensile Strength, Ultimate	126 MPa	18300 psi	ASTM D 638
Tensile Strength, Ultimate	206 MPa	29900 psi	-40?C; ASTM D 638
Tensile Strength, Ultimate	55.2 MPa	8010 psi	150?C; ASTM D 638
Tensile Strength, Ultimate	70.3 MPa	10200 psi	90?C; ASTM D 638
Elongation at Break	3 %	3 %	-40?C; ASTM D 638
Elongation at Break	3.3 %	3.3 %	ASTM D 638
Elongation at Break	3.3 %	3.3 %	ISO 527
Elongation at Break	7 %	7 %	90?C; ASTM D 638
Elongation at Break	7.5 %	7.5 %	150?C; ASTM D 638
Tensile Modulus	2.7 GPa	392 ksi	150?C; ASTM D 638
Tensile Modulus	3.28 GPa	476 ksi	90?C; ASTM D 638
Tensile Modulus	9.3 GPa	1350 ksi	ISO 527
Tensile Modulus	9.31 GPa	1350 ksi	ASTM D 638
Tensile Modulus	9.79 GPa	1420 ksi	-40?C; ASTM D 638
Flexural Modulus	2.25 GPa	326 ksi	150?C; ASTM D 790
Flexural Modulus	2.3 GPa	334 ksi	150?C; ISO 178
Flexural Modulus	3 GPa	435 ksi	93?C; ISO 178
Flexural Modulus	3.01 GPa	437 ksi	90?C; ASTM D 790
Flexural Modulus	7.83 GPa	1140 ksi	ISO 178
Flexural Modulus	8.28 GPa	1200 ksi	ASTM D 790
Flexural Modulus	8.9 GPa	1290 ksi	-40?C; ASTM D 790
Flexural Modulus	8.9 GPa	1290 ksi	-40?C; ISO 178
Flexural Strength	193 MPa	28000 psi	ASTM D 790
Flexural Strength	266 MPa	38600 psi	-40?C; ASTM D 790
Flexural Strength	60 MPa	8700 psi	150?C; ASTM D 790
Flexural Strength	86.2 MPa	12500 psi	90?C; ASTM D 790
Compressive Strength	148 MPa	21500 psi	ASTM D 695
Izod Impact, Notched (ISO)	13 kJ/m?	6.19 ft-lb/in?	ISO 180/1A
Izod Impact, Unnotched	9.6 J/cm	18 ft-lb/in	50%RH; ASTM D 4812
Izod Impact, Unnotched Low Temp	9.6 J/cm	18 ft-lb/in	-40?C; ASTM D 4812
Charpy Impact Unnotched	7 J/cm?	33.3 ft-lb/in?	ISO 179/1eU
Charpy Impact, Notched, Low Temp	1.2 J/cm?	5.71 ft-lb/in?	-30?C; ISO 179/1eA
Charpy Impact, Unnotched Low Temp	8.6 J/cm?	40.9 ft-lb/in?	-30?C; ISO 179/1eU
Charpy Impact, Notched	1.4 J/cm?	6.66 ft-lb/in?	ISO 179/1eA
Izod Impact, Notched	1.01 J/cm	1.89 ft-lb/in	-40?C; ASTM D 256
Izod Impact, Notched	1.33 J/cm	2.49 ft-lb/in	ASTM D 256
Electrical Properties
Volume Resistivity	1e+013 ohm-cm	1e+013 ohm-cm	IEC 60093
Volume Resistivity	1e+015 ohm-cm	1e+015 ohm-cm	ASTM D 257
Surface Resistance	1e+014 ohm	1e+014 ohm	ASTM D 257
Surface Resistance	1e+014 ohm	1e+014 ohm	IEC 60093
Dielectric Constant	3.3	3.3	1E6 Hz; ASTM D 150
Dielectric Constant	3.3	3.3	1E6 Hz; 23?C; IEC 60250
Dielectric Constant	3.4	3.4	1E3 Hz; ASTM D 150
Dielectric Strength	12 kV/mm	305 kV/in	150?C; 3.2mm (0.125in); Short Time; 500 V/s in oil; ASTM D 149
Dielectric Strength	14.5 kV/mm	368 kV/in	150?C; 1.6mm (0.062in); Short Time; 500 V/s in oil; ASTM D 149
Dielectric Strength	17.5 kV/mm	445 kV/in	95?C; 3.2mm (0.125in); Short Time; 500 V/s in oil; ASTM D 149
Dielectric Strength	21.5 kV/mm	546 kV/in	23?C; 3.2mm (0.125in); Short Time; 500 V/s in oil; ASTM D 149
Dielectric Strength	24 kV/mm	610 kV/in	95?C; 1.6mm (0.062in); Short Time; 500 V/s in oil; ASTM D 149
Dielectric Strength	26.5 kV/mm	673 kV/in	23?C; 1.6mm (0.062in); Short Time; 500 V/s in oil; ASTM D 149
Dissipation Factor	0.01	0.01	1E3 Hz; ASTM D 150
Dissipation Factor	0.015	0.015	1E6 Hz; ASTM D 150
Dissipation Factor	0.015	0.015	1E6 Hz; IEC 60250
Comparative Tracking Index	325 V	325 V	23?C; 3.0mm; UL 746A
Thermal Properties
CTE, linear 20?C	14 ?m/m-?C	7.78 ?in/in-?F	23 - 55?C (73 - 130?F); Parallel; ASTM E 831
CTE, linear 20?C	14 ?m/m-?C	7.78 ?in/in-?F	23 - 55?C (73 - 130?F); Parallel; ISO 11359-1/-2
CTE, linear 20?C	23 ?m/m-?C	12.8 ?in/in-?F	2.0mm; 23 - 55?C (73 - 130?F); Parallel; ASTM E 831
CTE, linear 20?C	23 ?m/m-?C	12.8 ?in/in-?F	2.0mm; 23 - 55?C (73 - 130?F); Parallel; ISO 11359-1/-2
CTE, linear 20?C	24 ?m/m-?C	13.3 ?in/in-?F	-40 - 23?C (-40 - 73?F); Parallel; ASTM E 831
CTE, linear 20?C	24 ?m/m-?C	13.3 ?in/in-?F	-40 - 23?C (-40 - 73?F); Parallel; ISO 11359-1/-2
CTE, linear 20?C Transverse to Flow	122 ?m/m-?C	67.8 ?in/in-?F	2.0mm; 23 - 55?C (73 - 130?F); ASTM E 831
CTE, linear 20?C Transverse to Flow	122 ?m/m-?C	67.8 ?in/in-?F	2.0mm; 23 - 55?C (73 - 130?F); ISO 11359-1/-2
CTE, linear 20?C Transverse to Flow	85 ?m/m-?C	47.2 ?in/in-?F	23 - 55?C (73 - 130?F); ASTM E 831
CTE, linear 20?C Transverse to Flow	85 ?m/m-?C	47.2 ?in/in-?F	23 - 55?C (73 - 130?F); ISO 11359-1/-2
CTE, linear 20?C Transverse to Flow	85 ?m/m-?C	47.2 ?in/in-?F	-40 - 23?C (-40 - 73?F); ASTM E 831
CTE, linear 20?C Transverse to Flow	85 ?m/m-?C	47.2 ?in/in-?F	-40 - 23?C (-40 - 73?F); ISO 11359-1/-2
CTE, linear 20?C Transverse to Flow	92 ?m/m-?C	51.1 ?in/in-?F	55 - 160?C (130 - 320?F); ASTM E 831
CTE, linear 20?C Transverse to Flow	92 ?m/m-?C	51.1 ?in/in-?F	55 - 160?C (130 - 320?F); ISO 11359-1/-2
CTE, linear 100?C	8 ?m/m-?C	4.44 ?in/in-?F	55 - 160?C (130 - 320?F); Parallel; ASTM E 831
CTE, linear 100?C	8 ?m/m-?C	4.44 ?in/in-?F	55 - 160?C (130 - 320?F); Parallel; ISO 11359-1/-2
Melting Point	250 ?C	482 ?F	10?C/min; ISO 11357-1/-3
Melting Point	254 ?C	489 ?F	ASTM D 3418
Deflection Temperature at 0.46 MPa (66 psi)	240 ?C	464 ?F	ASTM D 648
Deflection Temperature at 1.8 MPa (264 psi)	220 ?C	428 ?F	ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi)	220 ?C	428 ?F	ASTM D 648
UL RTI, Electrical	140 ?C	284 ?F	3.0mm; UL 746B
UL RTI, Electrical	140 ?C	284 ?F	1.5mm; UL 746B
UL RTI, Electrical	140 ?C	284 ?F	0.75mm; UL 746B
UL RTI, Mechanical with Impact	140 ?C	284 ?F	0.75mm; UL 746B
UL RTI, Mechanical with Impact	140 ?C	284 ?F	1.5mm; UL 746B
UL RTI, Mechanical with Impact	140 ?C	284 ?F	3.0mm; UL 746B
UL RTI, Mechanical without Impact	140 ?C	284 ?F	3.0mm; UL 746B
UL RTI, Mechanical without Impact	140 ?C	284 ?F	1.5mm; UL 746B
UL RTI, Mechanical without Impact	140 ?C	284 ?F	0.75mm; UL 746B
Flammability, UL94	HB	HB	3.0mm; IEC 60695-11-10
Flammability, UL94	HB	HB	3.0mm; UL94
Flammability, UL94	HB	HB	1.5mm; IEC 60695-11-10
Flammability, UL94	HB	HB	1.5mm; UL94
Flammability, UL94	HB	HB	0.75mm; IEC 60695-11-10
Flammability, UL94	HB	HB	0.75mm; UL94
Oxygen Index	22 %	22 %	ISO 4589-1/-2
Processing Properties
Melt Temperature	270 - 290 ?C	518 - 554 ?F
Melt Temperature	280 ?C	536 ?F	Optimum
Mold Temperature	Min 95 ?C	Min 203 ?F
Mold Temperature	110 ?C	230 ?F	Optimum
Drying Temperature	120 ?C	248 ?F
Dry Time	4 hour	4 hour	Dehumidified Dryer
Moisture Content	Max 0.02 %	Max 0.02 %
Descriptive Properties
Additive	Impact Modifier
Appearance	Natural Color
Drying	Recommended
DuPont Product Category	Glass Reinforced Resins
DuPont Product Category	Toughened Resins
Features	Thermal Aging Resistance, Good
Features	Strength, Good
Features	Impact Resistance, Good
Features	Impact Modified
Features	Stiffness, Good
Form	Pellets
Heat Stabilized	Yes
Injection Moldable	Yes
Part Marking Code	>PET-IGF30<	ISO 11469
Processing Method	Injection Molding
Region	Americas
Region	Asia/Pacific
Region	Europe
Resin Identification	PET-IGF30	ISO 1043
Ultrasonic Weldable	Yes
Uses	Housings
Uses	Structural Parts
Uses	Automotive Applications
Printer friendly version

Some of the values displayed above may have been converted from their original units and/or rounded in order to display the information in a consistant format. Users requiring more precise data for scientific or engineering calculations can click on the property value to see the original value as well as raw conversions to equivalent units. We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding error. We also ask that you refer to MatWeb's disclaimer and terms of use regarding this information. Click here to view all the property values for this datasheet as they were originally entered into MatWeb.