DuPont Rynite? PET FR543 NC010 PET
Subcategory: Polyester, TP; Polyethylene Terephthalate (PET); Polymer; Thermoplastic
Material Notes:
Rynite? FR543 NC010 is a flame retardant, 43% glass reinforced polyethylene terephthalate. Has a 155C temperature index that is equivalent to many thermosets. Recognized by UL as UL94V-0 at 0.8mm(0.03in).
No vendors are listed for this material. Please click here if you are a supplier and would like information on how to add your listing to this material.
| Physical Properties | Metric | English | Comments | |
|
||||
| Density | 1.79 g/cc | 0.0647 lb/in? | ISO 1183 | |
| Specific Gravity | 1.79 g/cc | 0.0647 lb/in? | ASTM D 792 | |
| Filler Content | 43 % | 43 % | Glass fiber reinforcement | |
| Water Absorption | 0.06 % | 0.06 % | 50%RH,23?C,24h; 23?C; ASTM D 570 | |
| Moisture Absorption at Equilibrium | 0.11 % | 0.11 % | 50%RH; 23?C; ISO 62, Similar to | |
| Water Absorption at Saturation | 0.62 % | 0.62 % | Immersed; 23?C; ISO 62, Similar to | |
| Linear Mold Shrinkage | 0.0013 cm/cm | 0.0013 in/in | Flow 1.57mm (0.062in) | |
| Linear Mold Shrinkage | 0.002 cm/cm | 0.002 in/in | Parallel 2.0mm; ISO 294-4 | |
| Linear Mold Shrinkage | 0.002 cm/cm | 0.002 in/in | Flow 3.2mm (0.125in) | |
| Linear Mold Shrinkage | 0.0025 cm/cm | 0.0025 in/in | Parallel Annealed; ISO 294-4 | |
| Linear Mold Shrinkage, Transverse | 0.0048 cm/cm | 0.0048 in/in | 1.57mm (0.062in) | |
| Linear Mold Shrinkage, Transverse | 0.0065 cm/cm | 0.0065 in/in | 3.2mm (0.125in) | |
| Linear Mold Shrinkage, Transverse | 0.0075 cm/cm | 0.0075 in/in | 2.0mm; ISO 294-4 | |
| Linear Mold Shrinkage, Transverse | 0.0105 cm/cm | 0.0105 in/in | Annealed; ISO 294-4 | |
Mechanical Properties |
||||
|
||||
| Hardness, Rockwell M | 102 | 102 | ISO 2039/2 | |
| Hardness, Rockwell M | 95 | 95 | ASTM D 785 | |
| Hardness, Rockwell R | 120 | 120 | ASTM D 785 | |
| Hardness, Rockwell R | 122 | 122 | ISO 2039/2 | |
| Tensile Strength at Break | 170 MPa | 24700 psi | ISO 527 | |
| Tensile Strength, Ultimate | 172 MPa | 24900 psi | ASTM D 638 | |
| Tensile Strength, Ultimate | 210 MPa | 30500 psi | -40?C; ASTM D 638 | |
| Tensile Strength, Ultimate | 55.2 MPa | 8010 psi | 150?C; ASTM D 638 | |
| Tensile Strength, Ultimate | 86.5 MPa | 12500 psi | 90?C; ASTM D 638 | |
| Elongation at Break | 1.7 % | 1.7 % | -40?C; ASTM D 638 | |
| Elongation at Break | 1.8 % | 1.8 % | ASTM D 638 | |
| Elongation at Break | 1.8 % | 1.8 % | ISO 527 | |
| Elongation at Break | 4.3 % | 4.3 % | 90?C; ASTM D 638 | |
| Elongation at Break | 5.5 % | 5.5 % | 150?C; ASTM D 638 | |
| Tensile Modulus | 16.5 GPa | 2390 ksi | ASTM D 638 | |
| Tensile Modulus | 17 GPa | 2470 ksi | ISO 527 | |
| Tensile Modulus | 17.1 GPa | 2480 ksi | -40?C; ASTM D 638 | |
| Tensile Modulus | 5.05 GPa | 732 ksi | 150?C; ASTM D 638 | |
| Tensile Modulus | 8.21 GPa | 1190 ksi | 90?C; ASTM D 638 | |
| Flexural Modulus | 14.5 GPa | 2100 ksi | ASTM D 790 | |
| Flexural Modulus | 14.5 GPa | 2100 ksi | ISO 178 | |
| Flexural Modulus | 15.1 GPa | 2190 ksi | -40?C; ISO 178 | |
| Flexural Modulus | 15.2 GPa | 2200 ksi | -40?C; ASTM D 790 | |
| Flexural Modulus | 2.9 GPa | 421 ksi | 150?C; ASTM D 790 | |
| Flexural Modulus | 3.1 GPa | 450 ksi | 150?C; ISO 178 | |
| Flexural Modulus | 6.89 GPa | 999 ksi | 90?C; ASTM D 790 | |
| Flexural Modulus | 6.9 GPa | 1000 ksi | 93?C; ISO 178 | |
| Flexural Strength | 138 MPa | 20000 psi | 90?C; ASTM D 790 | |
| Flexural Strength | 248 MPa | 36000 psi | ASTM D 790 | |
| Flexural Strength | 310 MPa | 45000 psi | -40?C; ASTM D 790 | |
| Flexural Strength | 79.3 MPa | 11500 psi | 150?C; ASTM D 790 | |
| Compressive Strength | 231 MPa | 33500 psi | ASTM D 695 | |
| Shear Strength | 58.6 MPa | 8500 psi | ASTM D 732 | |
| Izod Impact, Unnotched | 7.5 J/cm | 14.1 ft-lb/in | ASTM D 4812 | |
| Izod Impact, Unnotched Low Temp | 5.1 J/cm | 9.55 ft-lb/in | -40?C; ASTM D 4812 | |
| Charpy Impact Unnotched | 4.3 J/cm? | 20.5 ft-lb/in? | ISO 179/1eU | |
| Charpy Impact, Notched, Low Temp | 1 J/cm? | 4.76 ft-lb/in? | -30?C; ISO 179/1eA | |
| Charpy Impact, Unnotched Low Temp | 3 J/cm? | 14.3 ft-lb/in? | -30?C; ISO 179/1eU | |
| Charpy Impact, Notched | 1 J/cm? | 4.76 ft-lb/in? | ISO 179/1eA | |
| Izod Impact, Notched | 0.91 J/cm | 1.7 ft-lb/in | -40?C; ASTM D 256 | |
| Izod Impact, Notched | 0.96 J/cm | 1.8 ft-lb/in | ASTM D 256 | |
Electrical Properties |
||||
|
||||
| Volume Resistivity | Min 1e+013 ohm-cm | Min 1e+013 ohm-cm | IEC 60093 | |
| Volume Resistivity | 1e+015 ohm-cm | 1e+015 ohm-cm | ASTM D 257 | |
| Surface Resistance | 1e+013 ohm | 1e+013 ohm | ASTM D 257 | |
| Surface Resistance | 1e+015 ohm | 1e+015 ohm | IEC 60093 | |
| Dielectric Constant | 4.1 | 4.1 | 1E3 Hz; ASTM D 150 | |
| Dielectric Constant | 4.1 | 4.1 | 1E6 Hz; ASTM D 150 | |
| Dielectric Constant | 4.1 | 4.1 | 1E6 Hz; 23?C; IEC 60250 | |
| Dielectric Strength | 12 kV/mm | 305 kV/in | 150?C; 3.2mm (0.125in); Short Time; 500 V/s in oil; ASTM D 149 | |
| Dielectric Strength | 13.5 kV/mm | 343 kV/in | 150?C; 1.6mm (0.062in); Short Time; 500 V/s in oil; ASTM D 149 | |
| Dielectric Strength | 16 kV/mm | 406 kV/in | 95?C; 3.2mm (0.125in); Short Time; 500 V/s in oil; ASTM D 149 | |
| Dielectric Strength | 17 kV/mm | 432 kV/in | 23?C; 3.2mm (0.125in); Short Time; 500 V/s in oil; ASTM D 149 | |
| Dielectric Strength | 21.5 kV/mm | 546 kV/in | 95?C; 1.6mm (0.062in); Short Time; 500 V/s in oil; ASTM D 149 | |
| Dielectric Strength | 23.5 kV/mm | 597 kV/in | 23?C; 1.6mm (0.062in); Short Time; 500 V/s in oil; ASTM D 149 | |
| Dissipation Factor | 0.009 | 0.009 | 1E3 Hz; ASTM D 150 | |
| Dissipation Factor | 0.017 | 0.017 | 1E6 Hz; ASTM D 150 | |
| Dissipation Factor | 0.017 | 0.017 | 1E6 Hz; IEC 60250 | |
| Comparative Tracking Index | 250 V | 250 V | IEC 60112 | |
| Comparative Tracking Index | 275 V | 275 V | 23?C; 3.0mm; UL 746A | |
Thermal Properties |
||||
|
||||
| CTE, linear 20?C | 11 ?m/m-?C | 6.11 ?in/in-?F | 23 - 55?C (73 - 130?F); Parallel; ASTM E 831 | |
| CTE, linear 20?C | 11 ?m/m-?C | 6.11 ?in/in-?F | 23 - 55?C (73 - 130?F); Parallel; ISO 11359-1/-2 | |
| CTE, linear 20?C | 16 ?m/m-?C | 8.89 ?in/in-?F | -40 - 23?C (-40 - 73?F); Parallel; ASTM E 831 | |
| CTE, linear 20?C | 16 ?m/m-?C | 8.89 ?in/in-?F | -40 - 23?C (-40 - 73?F); Parallel; ISO 11359-1/-2 | |
| CTE, linear 20?C | 17 ?m/m-?C | 9.44 ?in/in-?F | 2.0mm; 23 - 55?C (73 - 130?F); Parallel; ASTM E 831 | |
| CTE, linear 20?C | 17 ?m/m-?C | 9.44 ?in/in-?F | 2.0mm; 23 - 55?C (73 - 130?F); Parallel; ISO 11359-1/-2 | |
| CTE, linear 20?C Transverse to Flow | 55 ?m/m-?C | 30.6 ?in/in-?F | -40 - 23?C (-40 - 73?F); ASTM E 831 | |
| CTE, linear 20?C Transverse to Flow | 55 ?m/m-?C | 30.6 ?in/in-?F | -40 - 23?C (-40 - 73?F); ISO 11359-1/-2 | |
| CTE, linear 20?C Transverse to Flow | 79 ?m/m-?C | 43.9 ?in/in-?F | 23 - 55?C (73 - 130?F); ASTM E 831 | |
| CTE, linear 20?C Transverse to Flow | 79 ?m/m-?C | 43.9 ?in/in-?F | 23 - 55?C (73 - 130?F); ISO 11359-1/-2 | |
| CTE, linear 20?C Transverse to Flow | 85 ?m/m-?C | 47.2 ?in/in-?F | 2.0mm; 23 - 55?C (73 - 130?F); ASTM E 831 | |
| CTE, linear 20?C Transverse to Flow | 85 ?m/m-?C | 47.2 ?in/in-?F | 2.0mm; 23 - 55?C (73 - 130?F); ISO 11359-1/-2 | |
| CTE, linear 20?C Transverse to Flow | 96 ?m/m-?C | 53.3 ?in/in-?F | 55 - 160?C (130 - 320?F); ASTM E 831 | |
| CTE, linear 20?C Transverse to Flow | 96 ?m/m-?C | 53.3 ?in/in-?F | 55 - 160?C (130 - 320?F); ISO 11359-1/-2 | |
| CTE, linear 100?C | 7 ?m/m-?C | 3.89 ?in/in-?F | 55 - 160?C (130 - 320?F); Parallel; ASTM E 831 | |
| CTE, linear 100?C | 7 ?m/m-?C | 3.89 ?in/in-?F | 55 - 160?C (130 - 320?F); Parallel; ISO 11359-1/-2 | |
| Melting Point | 254 ?C | 489 ?F | ASTM D 3418 | |
| Melting Point | 254 ?C | 489 ?F | 10?C/min; ISO 11357-1/-3 | |
| Deflection Temperature at 0.46 MPa (66 psi) | 240 ?C | 464 ?F | ISO 75-1/-2 | |
| Deflection Temperature at 0.46 MPa (66 psi) | 247 ?C | 477 ?F | ASTM D 648 | |
| Deflection Temperature at 1.8 MPa (264 psi) | 224 ?C | 435 ?F | ISO 75-1/-2 | |
| Deflection Temperature at 1.8 MPa (264 psi) | 224 ?C | 435 ?F | ASTM D 648 | |
| UL RTI, Electrical | 155 ?C | 311 ?F | 3.0mm; UL 746B | |
| UL RTI, Electrical | 155 ?C | 311 ?F | 0.81mm; UL 746B | |
| UL RTI, Electrical | 155 ?C | 311 ?F | 1.5mm; UL 746B | |
| UL RTI, Mechanical with Impact | 155 ?C | 311 ?F | 1.5mm; UL 746B | |
| UL RTI, Mechanical with Impact | 155 ?C | 311 ?F | 0.81mm; UL 746B | |
| UL RTI, Mechanical with Impact | 155 ?C | 311 ?F | 3.0mm; UL 746B | |
| UL RTI, Mechanical without Impact | 155 ?C | 311 ?F | 3.0mm; UL 746B | |
| UL RTI, Mechanical without Impact | 155 ?C | 311 ?F | 0.81mm; UL 746B | |
| UL RTI, Mechanical without Impact | 155 ?C | 311 ?F | 1.5mm; UL 746B | |
| Flammability, UL94 | V-0 | V-0 | 1.5mm; UL94 | |
| Flammability, UL94 | V-0 | V-0 | 0.81mm; IEC 60695-11-10 | |
| Flammability, UL94 | V-0 | V-0 | 0.81mm; UL94 | |
| Flammability, UL94 | V-0 | V-0 | 3.0mm; IEC 60695-11-10 | |
| Flammability, UL94 | V-0 | V-0 | 3.0mm; UL94 | |
| Flammability, UL94 | V-0 | V-0 | 1.5mm; IEC 60695-11-10 | |
| Flammability, UL94 | 7 | 7 | 1.5 mm; IEC 60695-11-20 | |
| Flammability, UL94 | 7 | 7 | 1.5 mm; UL94 | |
| Oxygen Index | 35 % | 35 % | ASTM D 2863 | |
| Oxygen Index | 35 % | 35 % | ISO 4589-1/-2 | |
Processing Properties |
||||
|
||||
| Melt Temperature | 270 - 290 ?C | 518 - 554 ?F | ||
| Melt Temperature | 280 ?C | 536 ?F | Optimum | |
| Mold Temperature | Min 95 ?C | Min 203 ?F | ||
| Mold Temperature | 110 ?C | 230 ?F | Optimum | |
| Drying Temperature | 120 ?C | 248 ?F | ||
| Dry Time | 4 hour | 4 hour | Dehumidified Dryer | |
| Moisture Content | Max 0.02 % | Max 0.02 % | ||
Descriptive Properties |
||||
|
||||
| Additive | Flame Retardant | |||
| Appearance | Natural Color | |||
| Contains Flame Retardant | Yes | |||
| Drying | Recommended | |||
| DuPont Product Category | Flame Retardant Resins | |||
| DuPont Product Category | Glass Reinforced Resins | |||
| Features | Dimensional Stability, Good | |||
| Features | Electrical Properties, Good | |||
| Features | Flame Retardant | |||
| Features | Stiffness, Good | |||
| Features | Strength, Good | |||
| Features | Thermal Aging Resistance, Good | |||
| Form | Pellets | |||
| Heat Stabilized | Yes | |||
| Injection Moldable | Yes | |||
| Part Marking Code | >PET-GF43FR(17)< | ISO 11469 | ||
| Processing Method | Injection Molding | |||
| Region | Americas | |||
| Resin Identification | PET-GF43FR(17) | ISO 1043 | ||
| Ultrasonic Weldable | Yes | |||
| Uses | Phenolic Replacement | |||
| Uses | Electrical/Electronic Applications | |||
| Uses | Structural Parts | |||
| Uses | Appliances | |||
| Uses | Electrical Parts | |||
|
||||
 Printer friendly version |
||||
Some of the values displayed above may have been converted from their original units and/or rounded in order to display the information in a consistant format. Users requiring more precise data for scientific or engineering calculations can click on the property value to see the original value as well as raw conversions to equivalent units. We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding error. We also ask that you refer to MatWeb's disclaimer and terms of use regarding this information. Click here to view all the property values for this datasheet as they were originally entered into MatWeb.
