DuPont Hytrel? PET HTR5612 BK320 TPC-ET
Subcategory: Elastomer, TPE; Polyester, TP; Polymer; Thermoplastic
Material Notes:
Hytrel? HTR5612 BK320 is designed for blow molding or processing by techniques requiring high melt viscosity. It has nominal durometer hardness of 50D, is pigmented black with fine particle size carbon black, and contains a general purpose stabilizer.
No vendors are listed for this material. Please click here if you are a supplier and would like information on how to add your listing to this material.
| Physical Properties | Metric | English | Comments | |
|
||||
| Density | 1.17 g/cc | 0.0423 lb/in? | ISO 1183 | |
| Specific Gravity | 1.16 g/cc | 0.0419 lb/in? | ASTM D 792 | |
| Water Absorption | 0.4 % | 0.4 % | Immersion 24h; 23?C; ASTM D 570 | |
| Moisture Absorption at Equilibrium | 0.2 % | 0.2 % | 50%RH; 23?C; ISO 62 | |
| Water Absorption at Saturation | 0.6 % | 0.6 % | Immersed; 23?C; ISO 62 | |
| Linear Mold Shrinkage | 0.012 cm/cm | 0.012 in/in | Parallel 2.0mm; ISO 294-4 | |
| Linear Mold Shrinkage, Transverse | 0.015 cm/cm | 0.015 in/in | 2.0mm; ISO 294-4 | |
| Melt Flow | 2.2 g/10 min | 2.2 g/10 min | 2.16 kg/230?C; based on room temperature density; ISO 1133 | |
| Melt Flow | 2.6 g/10 min | 2.6 g/10 min | 230?C, 2.16kg; ISO 1133 | |
| Melt Flow | 3 g/10 min | 3 g/10 min | 2.16kg at 230?C; ASTM D 1238 | |
Mechanical Properties |
||||
|
||||
| Hardness, Shore D | 48 | 48 | 15s; ISO 868 | |
| Hardness, Shore D | 50 | 50 | Maximum; ASTM D 2240 | |
| Hardness, Shore D | 50 | 50 | Maximum; ISO 868 | |
| Tensile Strength at Break | 36 MPa | 5220 psi | ISO 527 | |
| Tensile Strength at Break | 36 MPa | 5220 psi | ASTM D 638 | |
| Tensile Strength, Yield | 5.5 MPa | 798 psi | @ 5% Strain; 23?C; ASTM D 638 | |
| Tensile Strength, Yield | 8.3 MPa | 1200 psi | @ 10% Strain; 23?C; ASTM D 638 | |
| Tensile Strength, Yield | 8.9 MPa | 1290 psi | @ 10% Strain; 23?C; ISO 527 | |
| Elongation at Break | Min 300 % | Min 300 % | ISO 527 | |
| Elongation at Break | 450 % | 450 % | ISO 527 | |
| Elongation at Break | 480 % | 480 % | Nominal; ISO 527 | |
| Elongation at Break | 530 % | 530 % | ASTM D 638 | |
| Tensile Modulus | 0.074 GPa | 10.7 ksi | ISO 527 | |
| Flexural Modulus | 0.045 GPa | 6.53 ksi | 100?C; ISO 178 | |
| Flexural Modulus | 0.046 GPa | 6.67 ksi | 100?C; ASTM D 790 | |
| Flexural Modulus | 0.115 GPa | 16.7 ksi | ISO 178 | |
| Flexural Modulus | 0.124 GPa | 18 ksi | ASTM D 790 | |
| Flexural Modulus | 0.47 GPa | 68.2 ksi | -40?C; ISO 178 | |
| Flexural Modulus | 0.51 GPa | 74 ksi | -40?C; ASTM D 790 | |
| Izod Impact, Notched (ISO) | NB | NB | ISO 180/1A | |
| Izod Impact, Notched, Low Temp (ISO) | 114 kJ/m? | 54.2 ft-lb/in? | -40?C; ISO 180/1A | |
| Charpy Impact, Notched, Low Temp | 15.2 J/cm? | 72.3 ft-lb/in? | -40?C; ISO 179/1eA | |
| Charpy Impact, Notched, Low Temp | NB | NB | -30?C; ISO 179/1eA | |
| Charpy Impact, Notched | NB | NB | ISO 179/1eA | |
| Izod Impact, Notched | 1.1 J/cm | 2.06 ft-lb/in | -40?C; ASTM D 256 | |
| Izod Impact, Notched | NB | NB | ASTM D 256 | |
Electrical Properties |
||||
|
||||
| Volume Resistivity | 8e+010 ohm-cm | 8e+010 ohm-cm | IEC 60093 | |
| Surface Resistance | 5e+014 ohm | 5e+014 ohm | IEC 60093 | |
| Dielectric Constant | 4.3 | 4.3 | 1E6 Hz; IEC 60250 | |
| Dielectric Constant | 4.7 | 4.7 | 1E2 Hz; IEC 60250 | |
| Dielectric Strength | 20 kV/mm | 508 kV/in | IEC 60243-1 | |
| Dissipation Factor | 0.0175 | 0.0175 | 1E2 Hz; IEC 60250 | |
| Dissipation Factor | 0.04 | 0.04 | 1E6 Hz; IEC 60250 | |
| Comparative Tracking Index | Min 600 V | Min 600 V | IEC 60112 | |
| Comparative Tracking Index | Min 600 V | Min 600 V | 23?C; 3.0mm; UL 746A | |
Thermal Properties |
||||
|
||||
| Melting Point | 196 ?C | 385 ?F | ASTM D 3418 | |
| Melting Point | 198 ?C | 388 ?F | 10?C/min; ISO 11357-1/-3 | |
| Deflection Temperature at 0.46 MPa (66 psi) | 62 ?C | 144 ?F | ASTM D 648 | |
| Deflection Temperature at 1.8 MPa (264 psi) | 40 ?C | 104 ?F | ISO 75-1/-2 | |
| Deflection Temperature at 1.8 MPa (264 psi) | 44 ?C | 111 ?F | ASTM D 648 | |
| Brittleness Temperature | -100 ?C | -148 ?F | ISO 974 | |
| UL RTI, Electrical | 50 ?C | 122 ?F | 3.0mm; UL 746B | |
| UL RTI, Electrical | 50 ?C | 122 ?F | 1.5mm; UL 746B | |
| UL RTI, Mechanical with Impact | 50 ?C | 122 ?F | 1.5mm; UL 746B | |
| UL RTI, Mechanical with Impact | 50 ?C | 122 ?F | 3.0mm; UL 746B | |
| UL RTI, Mechanical without Impact | 50 ?C | 122 ?F | 3.0mm; UL 746B | |
| UL RTI, Mechanical without Impact | 50 ?C | 122 ?F | 1.5mm; UL 746B | |
| Flammability, UL94 | HB | HB | 3.0mm; IEC 60695-11-10 | |
| Flammability, UL94 | HB | HB | 3.0mm; UL94 | |
| Flammability, UL94 | HB | HB | 1.5mm; IEC 60695-11-10 | |
| Flammability, UL94 | HB | HB | 1.5mm; UL94 | |
| Oxygen Index | 20 % | 20 % | ISO 4589-1/-2 | |
Processing Properties |
||||
|
||||
| Melt Temperature | 230 ?C | 446 ?F | Optimum; Injection Molding | |
| Mold Temperature | 40 - 50 ?C | 104 - 122 ?F | Injection Molding | |
| Mold Temperature | 45 ?C | 113 ?F | Optimum; Injection Molding | |
| Drying Temperature | 110 ?C | 230 ?F | Blow Molding | |
| Drying Temperature | 110 ?C | 230 ?F | Injection Molding | |
| Dry Time | 3 - 4 hour | 3 - 4 hour | Injection Molding; Dehumidified Dryer | |
| Dry Time | 3 - 4 hour | 3 - 4 hour | Blow Molding; Dehumidified Dryer | |
| Moisture Content | Max 0.02 % | Max 0.02 % | Blow Molding | |
| Moisture Content | Max 0.02 % | Max 0.02 % | Injection Molding | |
Descriptive Properties |
||||
|
||||
| Additive | Antioxidant | |||
| Appearance | Black | |||
| Drying | Recommended | |||
| DuPont Product Category | Blow Moldable Resins | |||
| Features | Abrasion Resistance | |||
| Features | Fatigue Resistance | |||
| Features | Flexibility, Low Temperature | |||
| Features | Grease Resistance | |||
| Features | Melt Strength, Good | |||
| Features | Viscosity, High | |||
| Form | Pellets | |||
| Part Marking Code | >TPC-ET< | ISO 11469 | ||
| Processing Method | Blow Molding | |||
| Region | Americas | |||
| Region | Asia/Pacific | |||
| Region | Europe | |||
| Resin Identification | TPC-ET | ISO 1043 | ||
| Uses | Automotive Applications | |||
| Uses | Blow Molded Applications | |||
| Uses | CVJ | |||
|
||||
 Printer friendly version |
||||
Some of the values displayed above may have been converted from their original units and/or rounded in order to display the information in a consistant format. Users requiring more precise data for scientific or engineering calculations can click on the property value to see the original value as well as raw conversions to equivalent units. We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding error. We also ask that you refer to MatWeb's disclaimer and terms of use regarding this information. Click here to view all the property values for this datasheet as they were originally entered into MatWeb.
