Daikin PFA AP-231SH NEOFLON PFA Semiconductor Grade
Subcategory: Fluoropolymer; PFA; Polymer; Thermoplastic
Material Notes:
NEOFLON PFA semiconductor grade.
Applications: Linings, tubing, etc.
Information provided by Daikin Industries.
Click here to view available vendors for this material.
| Physical Properties | Metric | English | Comments | |
|
||||
| Specific Gravity | 2.15 g/cc | 0.0777 lb/in? | at 25?C | |
| Bulk Density | 1.2 g/cc | 0.0434 lb/in? | ||
| Melt Flow | 1.5 - 2.5 g/10 min | 1.5 - 2.5 g/10 min | 372?C, 49 N load | |
Mechanical Properties |
||||
|
||||
| Coefficient of Friction | 0.04 - 0.06 | 0.04 - 0.06 | ||
| Taber Abrasion, mg/1000 Cycles | 0 - 96.75 | 0 - 96.75 | Mass calculated using specific gravity, 9.8 N load, cs-10 wheel | |
Electrical Properties |
||||
|
||||
| Dielectric Constant | 1.92 - 2.12 | 1.92 - 2.12 | at 1 kHz and 1 MHz; ASTM D150 | |
| Dissipation Factor | 0.0001 - 0.00021 | 0.0001 - 0.00021 | ||
Thermal Properties |
||||
|
||||
| Flammability, UL94 | V-0 | V-0 | ||
| Oxygen Index | Min 95 % | Min 95 % | ||
|
||||
 Printer friendly version |
||||
Some of the values displayed above may have been converted from their original units and/or rounded in order to display the information in a consistant format. Users requiring more precise data for scientific or engineering calculations can click on the property value to see the original value as well as raw conversions to equivalent units. We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding error. We also ask that you refer to MatWeb's disclaimer and terms of use regarding this information. Click here to view all the property values for this datasheet as they were originally entered into MatWeb.
