Solvay Advanced Polymers AMODEL?PPA A-1115 HS Polyphthalamide (PPA) Resin, 15% Glass Reinforced, at 50% RH
Subcategory: Filled/Reinforced Thermoplastic; Polymer; Polyphthalamide; Thermoplastic
Close Analogs: This product line was acquired by Solvay Advanced Polymers from BP Amoco in November 2001.
MatWeb has an entry for this material dry as molded.
Material Notes:
Data provided by the manufacturer, Amoco Corporation.
AMODEL A-1115 HS resin is a 15% glass reinforced, heat stabilized polyphthalamide (PPA) which exhibits a high deflection temperature, high flexural modulus, and high tensile strength. Excellent creep resistance and low moisture absorption are also characteristic of this resin. AMODEL A-1115 HS resin can be easily processed using conventional equipment and methods.
| Physical Properties | Metric | English | Comments | |
|
||||
| Density | 1.26 g/cc | 0.0455 lb/in? | Dry As Molded | |
Mechanical Properties |
||||
|
||||
| Tensile Strength, Ultimate | 112 MPa | 16200 psi | ASTM D638 | |
| Elongation at Break | 1.9 % | 1.9 % | ASTM D638 | |
| Tensile Modulus | 8.3 GPa | 1200 ksi | ASTM D638 | |
| Flexural Modulus | 6.2 GPa | 899 ksi | ASTM D790 | |
| Flexural Yield Strength | 161 MPa | 23400 psi | ASTM D790 | |
| Compressive Yield Strength | 190 MPa | 27600 psi | ASTM D695 | |
| Shear Strength | 81 MPa | 11700 psi | ASTM D732 | |
| Izod Impact, Notched | 0.36 J/cm | 0.674 ft-lb/in | ASTM D256 | |
Electrical Properties |
||||
|
||||
| Electrical Resistivity | 2e+015 ohm-cm | 2e+015 ohm-cm | ASTM D257 | |
| Dielectric Constant | 4 | 4 | at 1 MHz. ASTM D150 | |
| Dielectric Constant, Low Frequency | 4.4 | 4.4 | 60 Hz; ASTM D150 | |
| Dielectric Strength | 19 kV/mm | 483 kV/in | ASTM D149 | |
| Dissipation Factor | 0.023 | 0.023 | at 1 MHz. ASTM D150 | |
| Dissipation Factor, Low Frequency | 0.008 | 0.008 | 60 Hz; ASTM D150 | |
| Arc Resistance | 115 sec | 115 sec | ASTM D495 | |
| Comparative Tracking Index | 550 V | 550 V | ||
Processing Properties |
||||
|
||||
| Processing Temperature | 321 - 343 ?C | 610 - 649 ?F | Melt Range; Injection Molding | |
|
||||
 Printer friendly version |
||||
Some of the values displayed above may have been converted from their original units and/or rounded in order to display the information in a consistant format. Users requiring more precise data for scientific or engineering calculations can click on the property value to see the original value as well as raw conversions to equivalent units. We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding error. We also ask that you refer to MatWeb's disclaimer and terms of use regarding this information. Click here to view all the property values for this datasheet as they were originally entered into MatWeb.
